Sea-Bird Electronics SBE 38 Manual de usuario Pagina 64
- Pagina / 124
- Tabla de contenidos
- SOLUCIÓN DE PROBLEMAS
- MARCADORES
Valorado. / 5. Basado en revisión del cliente
Manual revision 006 Section 4: Deploying and Operating SBE 19plus V2 SBE 19plus V2
64
Calibration Coefficients Commands
Calibration coefficients are initially factory-set and should agree with
Calibration Certificates shipped with the 19plus V2.
Temperature
TCalDate=S S=calibration date
TA0=F F=A0
TA1=F F=A1
TA2=F F=A2
TA3=F F=A3
TOffset=F F=offset correction
Conductivity
CCalDate=S S=calibration date
CG=F F=G
CH=F F=H
CI=F F=I
CJ=F F=J
CPCor=F F=pcor
CTCor=F F=tcor
CSlope=F F=slope correction
Pressure - General
PCalDate=S S=calibration date
PRange=F F=sensor full scale range (psia)
POffset=F F=offset correction (decibars)
Strain-Gauge Pressure
PA0=F F=A0
PA1=F F=A1
PA2=F F=A2
PTempA0=F F=pressure temperature A0
PTempA1=F F=pressure temperature A1
PTempA2=F F=pressure temperature A2
PTCA0=F F=pressure temperature compensation ptca0
PTCA1=F F=pressure temperature compensation ptca1
PTCA2=F F=pressure temperature compensation ptca2
PTCB0=F F=pressure temperature compensation ptcb0
PTCB1=F F=pressure temperature compensation ptcb1
PTCB2=F F=pressure temperature compensation ptcb2
Optional Quartz Pressure
PC1=F F=C1
PC2=F F=C2
PC3=F F=C3
PD1=F F=D1
PD2=F F=D2
PT1=F F=T1
PT2=F F=T2
PT3=F F=T3
PT4=F F=T4
PSlope=F F=slope correction
External Frequency
ExtFreqSF=F F=external frequency scale factor (applies to
optional Quartz pressure sensor)
Voltage Channels
The following commands set voltage channel offsets and slopes at the factory. These
are properties of the 19plus V2’s electronics, and are not calibration coefficients for the
auxiliary sensors. These commands are included here for completeness, but should
never be used by the customer.
VOffset0= VSlope0=
VOffset1= VSlope1=
VOffset2= VSlope2=
VOffset3= VSlope3=
VOffset4= VSlope4=
VOffset5= VSlope5=
Notes:
• F = floating point number
S = string with no spaces
• If using an SBE 38 secondary
temperature sensor, its
calibration coefficients are not
stored in the 19plus V2
EEPROM. View and/or modify
the instrument’s calibration
coefficients by connecting the
instrument to the computer
directly and using SEATERM.
Note:
If using auxiliary A/D sensors (Volt0=
through Volt5=), their calibration
coefficients are not stored in the
19plus V2 EEPROM, but are stored in
the 19plus V2 configuration (.xmlcon or
.con) file. View and/or modify the
calibration coefficients using the
Configure menu in SBE Data
Processing or the Configure Inputs
menu in Seasave.
- SBE 19plus V2 1
- SEACAT Profiler 1
- Limited Liability Statement 2
- Table of Contents 3
- Section 1: Introduction 5
- Unpacking SBE 19plus V2 6
- System Description 7
- Specifications 11
- Continued from previous page 12
- Sample Timing (Moored Mode) 14
- Batteries 15
- Battery Endurance 15
- External Power 17
- Data Storage 19
- Data I/O 19
- Magnetic Reed Switch 19
- Vertical Mount 20
- Horizontal Mount 23
- Section 3: 24
- See SeatermV2’s Help files 25
- See Seaterm232’s Help files 25
- Profiling Mode 31
- Moored Mode 32
- Pump Operation - General 33
- Pump Operation - Moored Mode 34
- Real-Time Setup 36
- Timeout Description 37
- Command Descriptions 38
- Status Commands (continued) 40
- Profiling Mode (MP) 58
- Moored Mode (MM) 58
- Data Output Formats 66
- Setup for Deployment 78
- Deployment 79
- Acquiring Real-Time Data 82
- Recovery 84
- Uploading Data 85
- The commands and responses 87
- Command/Data Echo Area 87
- Editing Raw Data File 91
- Corrosion Precautions 92
- Plumbing Maintenance 93
- Replacing Alkaline Batteries 94
- CAUTION: 97
- Do not recharge the Ni-Cad 97
- Barbed caps for cleaning 98
- Pressure Sensor Maintenance 99
- Pump Maintenance 99
- 8-inch socket wrench; 100
- Sensor Calibration 101
- Pressure Sensor 102
- Section 6: Troubleshooting 103
- Problem 4: Program Corrupted 104
- Glossary 105
- Sensor Interface 107
- Real-Time Clock 107
- Sensors 107
- Battery Wiring 108
- Appendix II: 109
- DESCRIPTION 110
- WetLabs=x 110
- AF24173 ANTI-FOULANT DEVICE 114
- AF24173 Anti-Foulant Device 115
© 2020, manymanuals.es. Todos los derechos reservados | 0.048 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales