Sea-Bird Electronics SBE 38 Manual de usuario descargar pdf (Pagina 110)

Manual revision 006 Appendix III: Command Summary SBE 19plus V2

110

Appendix III: Command Summary

CATEGORY COMMAND

DESCRIPTION

Status

GetCD

Get and display configuration data (setup

parameters).

GetSD

Get and display status data.

GetCC

Get and display calibration coefficients.

Get EC

Get and display event counter data.

ResetEC

Delete all events in event counter.

GetHD

Get and display hardware data.

Get and display configuration data (setup parameters)

and status data.

DCal

Get and display calibration coefficients.

General

Setup

DateTime=

mmddyyyyhhmmss

Set real-time clock month, day, year, hour,

minute, second.

BaudRate=x

x= baud rate (600, 1200, 2400, 4800, 9600, 19200,

38400, 57600, or 115200). Default 9600.

Echo=x

x=Y: Echo characters as you type.

x=N: Do not.

OutputExecutedTag=x

x=Y: Display XML Executing and Executed tags.

x=N: Do not.

BatteryType=x

x=alkaline: Alkaline (or optional lithium) batteries.

x=nicad: Nickel-Cadmium batteries.

x=nimh: Nickel Metal Hydride batteries.

InitLogging

After all previous data has been uploaded, send this

before starting to log to make entire memory

available for recording. If not sent, data stored after

last sample. Equivalent to SampleNumber=0.

SampleNumber=x

x= sample number for last sample in memory. After

all previous data has been uploaded, set to 0 before

starting to log to make entire memory available for

recording. If not reset to 0, data stored after last

sample. SampleNumber=0 is equivalent to

InitLogging.

HeaderNumber=x

header and cast number for last cast in memory.

Biowiper=x

x=Y: Configuration includes ECO-FL fluorometer

with Bio-Wiper (voltage or RS-232 auxiliary sensor).

x=N: Does not.

Enter quiescent (sleep) state. Main power turned off,

but data logging and memory retention unaffected.

Pressure and

Voltage

Sensor Setup

PType=x

x=1: Strain-gauge pressure sensor.

x=3: Quartz with temperature compensation.

Volt0=x

x=Y: Enable external voltage 0. x=N: Do not.

Volt1=x

x=Y: Enable external l voltage 1. x=N: Do not.

Volt2=x

x=Y: Enable external l voltage 2. x=N: Do not.

Volt3=x

x=Y: Enable external l voltage 3. x=N: Do not.

Volt4=x

x=Y: Enable external l voltage 4. x=N: Do not.

Volt5=x

x=Y

: Enable external l voltage 5.

x=N

: Do not.

RS-232

Sensor Setup

SBE38=x

x=Y: Enable SBE 38. x=N: Do not.

WetLabs=x

x=Y: Enable WET Labs RS-232 sensor.

x=N: Do not.

GTD=x

x=Y: Enable GTD. x=N: Do not.

DualGTD=x

x=Y: Enable dual (2) GTD x=N: Do not.

TGTD

Measure GTD(s), output 1 converted data sample for

each GTD.

SendGTD=command

Command 19plus V2 to send command to GTD and

receive response (command can be any command

recognized by GTD).

Optode=x

x=Y: Enable Aanderaa Optode. x=N: Do not.

SendOptode=command

Command 19plus V2 to send command to Optode

and receive response (command can be any

command recognized by Optode).

Note:

See Command

Descriptions in

Section 4: Deploying

and Operating

SBE 19plus V2 for

detailed information

and examples.

1 2 ... 105 106 107 108 109 110 111 112 113 114 115 ... 123 124

Comentarios a estos manuales

Sin comentarios

Sea-Bird Electronics SBE 38 Manual de usuario Pagina 110

Comentarios a estos manuales