Sea-Bird Electronics SBE 38 Manual de usuario descargar pdf (Pagina 60)

Manual revision 006 Section 4: Deploying and Operating SBE 19plus V2 SBE 19plus V2

Data Upload Commands

Stop logging before uploading data. If manually sending a data upload

command, data is uploaded in the format defined by OutputFormat=.

GetSamples:b,e or DDb,e Upload data from sample b to sample e.

If b and e are omitted, all data is uploaded.

First sample number is 1.

GetCast:x or DCx Profiling mode only.

Upload data from cast x. If x is omitted,

data from cast 1 is uploaded.

First cast number is 1.

GetHeaders:b,e or DHb,e Upload header b to header e. If b and e are

omitted, all headers are uploaded. First

header number is 1. Header includes:

• cast/header number

• month, day, hour, minute, and second

when cast was started

• first and last sample in cast/header

• Profiling mode only - number of

measurements to average per sample

(NAvg=)

• Moored mode only - interval

between samples (SampleInterval=)

• reason logging was halted

(batfail = battery voltage too low;

mag switch = switch turned off;

stop cmd = received Stop command

or Home or Ctrl Z character;

timeout = error condition;

unknown = error condition;

?????? = error condition)

Examples: Upload samples 1 to 1000 to a file (user input in bold):

(Click Capture menu and enter desired filename in dialog box.)

GETSAMPLES:1,1000

DD1,1000

Notes:

• Use the Upload menu to

upload data that will be

processed by SBE Data

Processing. Manually entering a

data upload command does not

produce data with the required

header information for processing

by our software. These

commands are included here for

reference for users who are

writing their own software.

• If not using the Upload menu -

To save data to a file, click the

Capture menu before entering a

data upload command.

• See Data Output Formats.

Example: Upload all data in second cast (cast 2) to a file (user input in bold):

(Click Capture menu and enter desired filename in dialog box.)

GETCAST:2

DC2

Examples:

Upload second header (header for cast 2) to a file (user input in bold):

(Click Capture menu and enter desired filename in dialog box.)

GETHEADERS:2,2

DH2,2

If in Profiling mode, 19plus V2 responds:

cast 2 30 Oct 2011 12:30:33 samples 35 to 87, avg = 1, stop = mag switch

If in Moored mode, 19plus V2 responds:

hdr 2 30 Oct 2011 12:30:33 samples 35 to 87, int = 10, stop = stop cmd

1 2 ... 55 56 57 58 59 60 61 62 63 64 65 ... 123 124

Comentarios a estos manuales

Sin comentarios

Sea-Bird Electronics SBE 38 Manual de usuario Pagina 60

Comentarios a estos manuales